If you have been struggling with the “Failed to Connect to a Windows Service” error, this article provides a simple guide to help you fix the issue.

March 2024: Enhance your computer’s performance and eliminate errors with this cutting-edge optimization software. Download it at this link

  1. Click here to download and install the optimization software.
  2. Initiate a comprehensive system scan.
  3. Allow the software to automatically fix and repair your system.

How to Fix “Failed to Connect to a Windows Service” Error Message on Windows 10

If you’re experiencing the “Failed to Connect to a Windows Service” error message on Windows 10, there are a few steps you can take to fix the issue. First, try restarting your computer and seeing if that resolves the problem. If not, follow these steps:

1. Press the Windows key + R to open the Run dialog box.
2. Type “services.msc” and hit Enter.
3. Locate the “Group Policy Client” and “System Event Notification Service” in the Services pane.
4. Right-click each service and select “Properties“.
5. Change the “Startup type” to “Automatic“.
6. Click “Apply” and “OK“.
7. Restart your computer.

If this doesn’t work, you can try resetting your group policy settings by following these steps:

1. Type “gpedit.msc” into the Run dialog box and hit Enter.
2. Navigate to “Computer Configuration -> Administrative Templates -> System -> Group Policy“.
3. Double-click “Configure Group Policy processing“.
4. Select “Enabled” and change the “Mode” to “Replace“.
5. Click “Apply” and “OK“.
6. Restart your computer.

If you’re still having issues, you may need to update your drivers or restore your computer to a previous backup. Before making any changes to your computer, be sure to back up your important files and settings.

Possible Causes of “Failed to Connect to a Windows Service” Error Message

  • Corrupted system files: If your system files are corrupted, you may encounter this error message.
  • Malware or virus infection: Malware or virus infection can cause issues with your system’s services and lead to this error message.
  • Outdated or faulty drivers: Incorrect or outdated drivers can cause issues with your system’s services and lead to this error message.
  • Windows update issues: If there are issues with Windows updates, you may encounter this error message.
    Outdated or faulty drivers: Incorrect or outdated drivers can cause issues with your system's services and lead to this error message.
Windows update issues: If there are issues with Windows updates, you may encounter this error message.
  • System configuration issues: If there are issues with your system’s configuration, you may encounter this error message.
  • Service dependencies issues: If there are issues with the dependencies of the service, you may encounter this error message.
    System configuration issues: If there are issues with your system's configuration, you may encounter this error message. 
Service dependencies issues: If there are issues with the dependencies of the service, you may encounter this error message.
  • Registry issues: If there are issues with your system’s registry, you may encounter this error message.

Fixing “Failed to Connect to a Windows Service” Error Message using the Registry Editor

If you’re experiencing the “Failed to Connect to a Windows Service” error message, you can use the Registry Editor to fix it. Here’s how:

1. Press the Windows key + R to open the Run dialog box.
2. Type “regedit” and press Enter to open the Registry Editor.
3. In the left-hand pane, navigate to “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services”.
4. Find the “gpsvc” key and right-click it.
5. Select “Permissions.”
6. Click “Advanced.”
7. Click “Change.”
8. Type “Administrators” in the box labeled “Enter the object name to select” and click “OK.”
9. Check the box labeled “Replace owner on subcontainers and objects.”
10. Click “Apply.”
11. In the “Permissions for gpsvc” pane, select the “Administrators” group.
12. Check the boxes labeled “Full Control” and “Read.”
13. Click “Apply.”
14. Close the Registry Editor and restart your computer.

If this doesn’t solve your problem, there may be other solutions available, such as resetting your computer or using a PC problem-solving tool like DriverFix. It’s also important to note that making changes to the Registry Editor can be risky, so proceed with caution and backup your system before making any changes.

Clean Booting the Affected Computer to Fix “Failed to Connect to a Windows Service” Error Message

Clean booting the affected computer can help fix the “Failed to Connect to a Windows Service” error message. To do this, follow these steps:

1. Press the Windows key + R to open the Run command.

2. Type “msconfig” in the Run command and press Enter.

3. Click the “Services” tab, then select the “Hide all Microsoft services” check box.

4. Click “Disable all,” then click “OK.”

5. Open the “Task Manager” by pressing the Ctrl + Shift + Esc keys.

6. Click the “Startup” tab, then click “Disable all.”

7. Restart your computer.

8. After restarting, check if the error message is still present.

Note that this process disables all non-Microsoft services and startup programs. If the error message disappears, you can re-enable services and startup programs one by one to identify the cause of the issue. If the error message persists, try resetting your PC or using a program like DriverFix to fix any driver-related issues.

Resetting the Affected Computer’s Winsock Catalog to Fix “Failed to Connect to a Windows Service” Error Message

To fix the “Failed to Connect to a Windows Service” error message, you can reset the Winsock catalog on the affected computer. This can be done using the Command Prompt with administrator permission. Here are the steps to follow:

1. Press the Windows key + X on your keyboard and select “Command Prompt (Admin)” from the options.

2. In the Command Prompt window, type “netsh winsock reset” and press Enter. This will reset the Winsock catalog.

3. Restart your computer and check if the error message is gone.

If the error message still persists, try resetting the Group Policy Client and System Event Notification Service. You can do this by following the same steps as above, but instead of typing the Winsock reset command, type “netsh int ip reset” and “netsh int ipv4 reset“.

If none of these solutions work, it may be best to seek professional help or consult online forums for further advice. Always be cautious when making changes to your computer’s settings and directory, and backup important files before attempting any fixes or shutdown commands.

Example Message
?

If you are facing the issue of “Failed to connect to a Windows service,” try restarting your computer and then attempt to connect again. Download this tool to run a scan

Was this article helpful?
YesNo