Month: February 2024

Dell Laptop New Battery Plugged in Not Charging Fix

Are you facing the issue of your Dell laptop’s new battery plugged in but not charging? Let’s explore some potential fixes for this common problem.

Important
Fortect can address the issue of a Dell laptop new battery plugged in not charging by repairing system files and settings.

Download Now

Identifying Symptoms and Causes

Dell laptop with new battery not charging

Identifying Symptoms: If your Dell laptop is displaying the message “new battery plugged in not charging,” there could be several reasons behind this issue. First, check if the battery icon shows a percentage that is not increasing despite being plugged in. Additionally, pay attention to any error messages related to the battery or charging system that may pop up on your screen.

Common Causes: One common reason for this problem is a faulty AC adapter or power cord. Ensure that the power cord is securely plugged into both the laptop and the electrical outlet. Additionally, check if there are any visible damages to the AC adapter or power cord that may be causing the issue. In some cases, the battery itself may be the culprit, requiring a replacement.

Further Troubleshooting: If the above steps do not resolve the issue, you may need to delve deeper into the problem. Try resetting the BIOS settings on your Dell laptop by following the manufacturer’s instructions. If that doesn’t work, consider updating your laptop’s operating system and drivers to ensure compatibility with the new battery. If all else fails, seek technical support from Dell for further diagnosis and assistance.

Checking AC Adapter and Battery Connection

Dell laptop AC adapter and battery connection

1. Check the AC adapter connection to ensure it is securely plugged into both the laptop and the power source. Make sure there are no loose connections or frayed wires.

2. Inspect the battery connection to the laptop. Remove the battery and reinsert it to ensure it is properly seated. Look for any signs of damage or corrosion on the battery contacts.

3. Test the AC adapter by trying a different power outlet or using a different adapter if possible. This will help determine if the issue lies with the adapter or the laptop.

4. Power cycle the laptop by shutting it down, removing the battery and AC adapter, holding down the power button for 30 seconds, then reconnecting the battery and AC adapter and turning the laptop back on.

5. Restart the laptop and access the BIOS settings by pressing the F2 key during boot-up. Check for any settings related to battery charging or power management that may be causing the issue.

6. If the problem persists, consider updating the BIOS to the latest version available from the Dell website. This may include fixes for battery charging issues or compatibility with new batteries.

Updated: February 2024

Fortect can help with the Dell laptop new battery plugged in not charging issue by repairing damaged system files and settings that may be causing the problem. It can also address any underlying issues such as missing files or damaged DLLs that could be preventing the battery from charging properly.

Additionally, Fortect can ensure that Windows runs smoothly, potentially resolving the charging issue.

Addressing Outdated Software and Drivers

Dell laptop with outdated software and drivers

  • Update Operating System:
    • Go to Settings > Update & Security.
    • Click on Check for updates and install any available updates.
  • Update Device Drivers:
    • Open Device Manager by pressing Windows key + X and selecting Device Manager.
    • Expand the Batteries section, right-click on the Microsoft ACPI-Compliant Control Method Battery, and select Update driver.
    • Follow the on-screen instructions to update the driver.
  • Update BIOS:
    • Visit the Dell support website and enter your laptop’s service tag.
    • Download and install the latest BIOS update for your laptop model.
    • Follow the installation instructions carefully.

Updating BIOS and Dell Quickset

To fix the issue of a new battery not charging on a Dell laptop, updating the BIOS and Dell Quickset can often resolve the problem.

First, ensure that your laptop is plugged into a power source using the AC power plug. Make sure the connection is secure and there are no issues with the power socket.

Updating the BIOS can help in recognizing the new battery and resolving any charging issues. To update the BIOS, visit the Dell website, enter your laptop’s service tag, and download the latest BIOS update. Follow the instructions to install the update.

Next, update the Dell Quickset software on your laptop. This software helps manage power options and battery settings.

Visit the Dell website, locate the Dell Quickset software for your laptop model, download the latest version, and install it on your laptop. Reboot your laptop after installing the software.

If the issue persists, try removing the battery, pressing and holding the power button for 30 seconds to drain any residual power, and then reinserting the battery.

Enhancing Battery Health and Runtime

1. Check the power adapter: Ensure that the power adapter is properly plugged into both the laptop and the power outlet. If there are any signs of damage, consider replacing it.

2. Reset the battery: To reset the battery, turn off the laptop, unplug the power adapter, and remove the battery. Press and hold the power button for 30 seconds, then reinsert the battery and plug in the power adapter.

3. Update the BIOS: Visit the Dell website to download and install the latest BIOS update for your laptop. This can help resolve any battery charging issues caused by software glitches.

4. Calibrate the battery: Fully charge the battery, then let it drain completely before charging it again. Repeat this process a few times to calibrate the battery and improve its overall health.

5. Replace the battery: If the battery is old and no longer holding a charge, it may be time to replace it with a new one. Make sure to purchase a genuine Dell battery to ensure compatibility and performance.

Frequently Asked Questions

Why is my Dell laptop not charging even with new battery?

Your Dell laptop may not be charging even with a new battery due to issues with the power source. Try reseating the battery and checking the power adaptor to ensure it is receiving power. Use a different wall outlet and bypass any surge protectors to see if that resolves the issue.

Why is my laptop not charging even after replacing battery?

Your laptop may not be charging even after replacing the battery due to a loose, unplugged, or damaged charging cable. Additionally, the charging ports could be clogged with dirt or debris, preventing proper power connection. Consider getting a laptop tune-up and thorough cleaning to resolve the issue.

How do I get my Dell laptop to recognize a new battery?

To get your Dell laptop to recognize a new battery, you should follow these steps:
– Turn off the computer
– Remove the AC adapter
– Take out the replacement battery
– Hold down the power button for 20 seconds
– Reconnect the battery cable and insert the new battery
– Put the bottom cover back on and try turning on the computer.

How do I force my Dell laptop to charge?

To force your Dell laptop to charge, you can try removing the battery, draining residual power by holding the power button for 30 seconds, and then reconnecting the battery and AC adapter.

Example Message
?

If your Dell laptop’s new battery is plugged in but not charging, try removing and reinserting the battery, checking for any loose connections, and restarting your laptop to see if that resolves the issue. If the problem persists, it may be necessary to replace the battery or seek assistance from Dell customer support. Download this tool to run a scan

Canon PIXMA Printer Offline Issue Fix

In this article, I will discuss how to fix the Canon PIXMA printer offline issue.

Important
Fortect can address freezing issues on a Canon Drucker offline by fixing registry errors and missing files.

Download Now

Restart Printer Spooler Service

To restart the Printer Spooler Service on your Canon PIXMA printer, follow these steps:

1. Press the Windows key + R to open the Run dialog box.

2. Type “services.msc” and press Enter to open the Services window.

3. Scroll down and locate the “Print Spooler” service.

4. Right-click on “Print Spooler” and select “Restart” from the context menu.

5. Wait for the service to restart and then close the Services window.

6. Try printing a test page on your Canon PIXMA printer to see if the issue has been resolved.

If restarting the Printer Spooler Service does not fix the offline issue, you may need to troubleshoot further by checking the printer connections, reinstalling the printer driver, or restarting your computer.

Disable Use Printer Offline Feature

To disable the Use Printer Offline feature on your Canon PIXMA printer, follow these steps:

1. Right-click on the printer icon in the Taskbar or Control Panel on your Windows 10 or Windows 11 computer.

2. Select See what’s printing from the context menu.

3. Click on Printer in the top menu, then uncheck the Use Printer Offline option.

4. If the printer remains offline, try restarting both the printer and your computer. Make sure the printer is properly connected to the computer and powered on.

5. Check for any pending print jobs in the printer queue and clear them if necessary.

6. Update the printer driver to the latest version from the Canon website to ensure compatibility with your operating system.

7. If the issue persists, try resetting your printer by unplugging it from the power source for a few minutes before plugging it back in.

8. If none of the above solutions work, consider contacting Canon customer support for further assistance.

Updated: February 2024

Fortect can help address Canon Drucker offline issues by repairing damaged system files, fixing faulty settings, and resolving freezing programs. It can also handle damaged DLLs, prevent virus damage, and address the Blue Screen of Death by identifying and repairing causes such as incompatible DLLs and drivers.

Additionally, Fortect can compare the current operating system with a healthy version for OS recovery without affecting user data.

Reinstall Canon Printer Driver

To reinstall the Canon printer driver, follow these steps:

1. Uninstall the current Canon printer driver:
– Go to the Control Panel on your Windows computer.
– Select “Programs and Features” or “Add or Remove Programs.”
– Locate the Canon printer driver in the list of installed programs.
– Click on the driver and select “Uninstall.”

2. Download the latest Canon printer driver:
– Visit the official Canon website.
– Look for the driver that is compatible with your printer model and operating system (e.g., Windows 10 or Windows 11).
– Download the driver to your computer.

3. Install the new Canon printer driver:
– Double-click on the downloaded driver file.
– Follow the on-screen instructions to complete the installation process.
– Restart your computer to ensure the new driver is properly installed.

Run Diagnostic Tool

Canon PIXMA printer diagnostic tool.

Step Description
1 Open the Control Panel on your computer.
2 Click on “Devices and Printers”.
3 Locate your Canon PIXMA printer in the list of devices.
4 Right-click on the printer and select “Run Diagnostic Tool”.
5 Follow the on-screen instructions to diagnose and fix the offline issue.

Fix Printer Offline Error on Mac

To fix the Canon PIXMA Printer Offline issue on your Mac, follow these steps:

1. Check Printer Connection: Ensure that your printer is properly connected to your Mac via USB cable or Wi-Fi network.

2. Restart Printer: Turn off your printer, wait for a few seconds, and then turn it back on to reset the connection.

3. Restart Mac: Sometimes, restarting your Mac can help resolve the offline printer error.

4. Update Printer Driver: Make sure you have the latest printer driver installed on your Mac. Visit the Canon website to download and install any updates.

5. Reset Printing System: Go to System Preferences > Printers & Scanners, right-click on the printer, and select “Reset printing system.” Re-add the printer and check if it’s online.

6. Check Printer Status: Ensure that there are no paper jams, low ink levels, or any other physical issues with the printer that may be causing it to go offline.

F.A.Qs

Why is my Canon printer saying its offline?

Your Canon printer is saying it’s offline for several possible reasons.

How do I get my Canon printer to go back online?

To get your Canon printer back online, you can try restarting the printer, checking the connection between the printer and computer, and ensuring that the printer is set as the default printer on your device. Additionally, you may need to update the printer driver or reinstall the printer software.

Can I use my Canon printer without Internet?

Yes, you can use your Canon printer without Internet by printing files and documents stored on your local hard drive or an attached disk or USB stick.

How do I get my printer back online?

To get your printer back online, you can troubleshoot offline printer problems in Windows by checking the printer connections, restarting the printer, and ensuring it is set as the default printer on your computer.

Example Message
?

If your Canon printer is offline, make sure to check the connection, power source, and printer settings before attempting to troubleshoot the issue. Download this tool to run a scan

Samsung LE40B620R3W Power Problems

In this article, I will discuss the power problems that some users have experienced with the Samsung LE40B620R3W television.

Important
Fortect may help with Samsung le40b620r3w freezing issues by addressing registry damage, missing files, or excessive junk.

Download Now

Warranty and Registration

Warranty and Registration: Make sure to check the warranty status of your Samsung LE40B620R3W before attempting any repairs. Register your product on Samsung’s website to ensure you have access to any necessary support or replacements. Keep all documentation, including proof of purchase and warranty information, in a safe place for easy reference.

Contact Samsung customer support for assistance with any power problems you may be experiencing with your TV.

Updated: February 2024

Fortect can help with Samsung LE40B620R3W problems such as freezing, crashing, and error messages. It repairs damaged system files, addresses virus damage, fixes DLL issues, and resolves the Blue Screen of Death.

By ensuring smooth operation and system stability, Fortect could potentially resolve the issues plaguing the Samsung LE40B620R3W.

Face-to-Face Support

  • Visit a Samsung service center to get professional help with diagnosing and fixing the power issues.
  • Speak directly with a customer service representative to discuss potential solutions.
    Visit a Samsung service center to get professional help with diagnosing and fixing the power issues.
Speak directly with a customer service representative to discuss potential solutions.
  • Attend a Samsung-sponsored workshop on troubleshooting power problems in your specific model.
  • Join a community forum to connect with other Samsung TV owners who may have experienced similar issues.
  • Invite a qualified technician to your home to assess the problem firsthand.

Troubleshoot and Book a Repair

To troubleshoot power problems with your Samsung LE40B620R3W, first check the power outlet and ensure it is working properly. If the outlet is fine, try unplugging the TV for a few minutes and then plugging it back in. If the issue persists, book a repair with Samsung’s authorized service center. You can do this by visiting their website or calling their customer service hotline.

Provide them with your TV’s model number and a detailed description of the problem for faster assistance. Samsung’s technicians will diagnose the issue and recommend the necessary repairs to get your TV up and running again.

How-to Videos and Screen Mirroring

Samsung TV remote control

How-to Videos Screen Mirroring
Watch instructional videos on troubleshooting power problems on Samsung LE40B620R3W Learn how to mirror your device screen to your Samsung LE40B620R3W TV
Step-by-step guides on checking connections, power supply, and other common issues Instructions on how to connect your phone, tablet, or laptop to your TV for easy screen sharing
Helpful tips and tricks for resolving power-related issues on your Samsung TV Enjoy seamless streaming of videos, photos, and presentations on a larger screen

F.A.Q.

Why did my Samsung TV suddenly stop working?

Your Samsung TV may have suddenly stopped working due to power supply issues. This could be caused by a faulty power supply board, defective power supply unit, or a blown fuse. Another possibility is a faulty remote control, so make sure to check the batteries and ensure it is working properly.

Why does my Samsung TV keep turning off and on repeatedly?

Your Samsung TV may be turning off and on repeatedly due to a poor connection. Try disconnecting and reconnecting the One Invisible Connection or One Connect Cable to the TV and the One Connect Box, making sure the cable is not pinched or bent sharply.

Example Message
?

If you are experiencing issues with your Samsung LE40B620R3W, it is recommended to contact Samsung customer support for assistance in troubleshooting and resolving the problems. Download this tool to run a scan

Laptop won’t recognize printer connection error fix

Having trouble getting your laptop to recognize your printer connection? Here’s how to fix that error.

Important
Fortect can address issues like damaged registry, missing files, or incompatible drivers causing laptop-printer recognition problems.

Download Now

General Troubleshooting Steps

  1. Check physical connections:
    • Ensure the printer is properly connected to the laptop via USB cable or wireless network.
    • Check for any loose or damaged cables.
  2. Restart devices:
    • Turn off both the laptop and printer.
    • Unplug the power cords for a few minutes.
      Turn off both the laptop and printer.
Unplug the power cords for a few minutes.
    • Restart the devices and try connecting again.
  3. Update printer drivers:
    • Open Device Manager by pressing Windows key + X and selecting it from the menu.
    • Locate the printer under Print queues and right-click to update the driver software.
  4. Check printer settings:
    • Ensure the printer is set as the default printer in the laptop settings.
    • Check the printer properties for any errors or issues.
  5. Run printer troubleshooter:
    • Go to Settings on the laptop and select Update & Security.
    • Click on Troubleshoot and select Printer to run the troubleshooter.

Connect and Install Your Printer

Printer connection screen

Connect the printer to your laptop using a USB cable or through a Wi-Fi connection.

If you are using a USB connection, plug one end of the cable into the printer and the other end into a USB port on your laptop.

If you are connecting wirelessly, make sure your printer is connected to the same Wi-Fi network as your laptop.

Once the physical connection is established, you may need to install the printer drivers on your laptop.

Go to the Control Panel on your Windows laptop, then select “Devices and Printers.”

Click on “Add a printer” and follow the on-screen instructions to install the necessary drivers for your printer.

After the drivers are installed, your laptop should recognize the printer connection.

If you are still experiencing issues, try power cycling both your laptop and printer, or check for any troubleshooting guides provided by the printer manufacturer.

Updated: February 2024

Fortect can help with a laptop that won’t recognize a printer by addressing underlying Windows issues that may be causing the problem. It can repair damaged system files and faulty settings that could be preventing the laptop from recognizing the printer.

Additionally, Fortect can ensure that Windows and other programs run smoothly by fixing issues such as missing files or a damaged registry that might be interfering with the printer recognition process.

Update and Install Printer Drivers

1. Open the Control Panel on your Windows operating system.
2. Click on Device Manager to view a list of connected devices.
3. Locate your printer under the Printers section and right-click on it.
4. Select Update Driver Software from the dropdown menu.
5. Choose to Search automatically for updated driver software to let Windows find and install the latest driver for your printer.
6. If Windows is unable to find the driver automatically, visit the manufacturer’s website and download the appropriate driver for your printer model.
7. Once the driver is downloaded, run the installation file and follow the on-screen instructions to complete the installation process.
8. Restart your laptop to ensure that the new printer driver is properly installed and recognized.
9. Try reconnecting your printer to your laptop to see if the issue has been resolved.

By updating and installing the correct printer driver, you can resolve the connection error and ensure that your laptop recognizes the printer properly.

Use the Printer Troubleshooter

If your laptop is not recognizing your printer connection, one simple fix you can try is using the Printer Troubleshooter tool on Windows. To access this tool, follow these steps:

1. Click on the Start menu and type “Troubleshoot” in the search bar.

2. Select “Troubleshoot settings” from the search results.

3. Scroll down and click on “Printer” under the “Find and fix other problems” section.

4. Click on “Run the troubleshooter” and follow the on-screen instructions.

This tool will help diagnose and potentially fix any issues with your printer connection. If the troubleshooter is unable to resolve the problem, you may need to check the printer’s connection to your laptop or reinstall the printer drivers.

Remember to check that your printer is connected to your laptop either via USB, Bluetooth, or Wi-Fi, depending on the type of printer you have. Additionally, ensure that your printer is powered on and properly set up on your network.

Add a Network or Wireless Printer

Step 1: Make sure your printer is connected to the same network as your laptop. This can be done either through a wireless connection or by connecting the printer to your router using an Ethernet cable.

Step 2: Open the Control Panel on your Windows operating system. You can do this by clicking on the Start menu and searching for “Control Panel.”

Step 3: Click on “Devices and Printers” and then select “Add a printer” from the menu.

Step 4: Your laptop will search for available printers on the network. Once your printer is detected, select it and follow the on-screen instructions to install the necessary drivers.

Step 5: If your printer is not automatically detected, you may need to manually enter the printer’s IP address. You can find this information in the printer’s settings or by printing a network configuration page.

Step 6: Once the printer is successfully added, you can test the connection by printing a test page. If the test page prints successfully, your laptop should now recognize the printer.

Reboot and Update Your System

If your laptop is having trouble recognizing your printer connection, a simple reboot and system update might be all that’s needed to fix the error.

First, restart your laptop to refresh the system and clear out any temporary glitches that might be causing the connection error. This simple step can often resolve minor issues with device recognition.

Next, check for any pending system updates that might be needed to ensure compatibility between your laptop and printer. Updating your operating system can sometimes resolve connectivity problems by installing the latest drivers and software.

After rebooting and updating your system, try reconnecting your printer to see if the error has been fixed. Make sure all cables are securely plugged in and that the printer is turned on. If the issue persists, you may need to troubleshoot further or seek assistance from technical support.

FAQs

Why is my laptop not recognizing my printer?

Your laptop may not be recognizing your printer due to hardware issues. Check the connection for wired printers and ensure the wireless option is turned on for wireless printers.

Why won’t my computer recognize my printer via USB?

Your computer may not be recognizing your printer via USB because the USB cable may not be correctly inserted into both the computer and printer. Try disconnecting and reconnecting the cable at both ends, as well as trying a different USB port.

How do you add a printer that isn’t showing up?

To add a printer that isn’t showing up, you can manually add it by going to the Devices section in Settings, selecting Printers & Scanners, and then clicking on Add a Printer. From there, choose “The printer that I want isn’t listed” and follow the prompts to add a local or network printer with manual settings.

How do I make my printer discoverable to my laptop?

To make your printer discoverable to your laptop, you can connect it with a wire or follow these steps to add a wireless printer: Select Start > Settings > Devices > Printers & scanners > Add a printer or scanner.

Example Message
?

If your laptop is not recognizing your printer, try troubleshooting the connection by checking the cables, updating printer drivers, and ensuring both devices are properly connected to the same network. Download this tool to run a scan

Can’t see my WiFi network in list of available networks

Having trouble connecting to your WiFi network because it’s not showing up in the list of available networks? Let’s troubleshoot that issue.

Important
Fortect addresses issues causing a computer to not display wireless networks, such as damaged system files and faulty settings.

Download Now

Identifying Causes for Network Visibility Issues

There are several potential causes for network visibility issues when your WiFi network is not showing up in the list of available networks.

1. Signal Interference: Check for any nearby devices that could be causing electromagnetic interference, such as microwaves, cordless phones, or Bluetooth devices. Move your router away from these sources of interference.

2. Router Placement: Ensure that your router is placed in a central location in your home and not hidden away in a cabinet or behind furniture. This will help improve the signal strength and visibility of your network.

3. Network Settings: Verify that your WiFi network is broadcasting its SSID and is not hidden. You can check this in your router settings and make sure that the SSID broadcast is enabled.

4. Network Security: Make sure that your network is not set to a hidden or closed network. Check that your WiFi network is using WPA or WPA2 security protocols to prevent unauthorized access.

By addressing these common issues, you can improve the visibility of your WiFi network and ensure that it appears in the list of available networks for your devices to connect to.

Enabling Wi-Fi and Network Services

WiFi settings icon

If you can’t see your WiFi network in the list of available networks, there are a few steps you can take to troubleshoot the issue. First, make sure your device’s WiFi is turned on. If it is, but you still can’t see your network, try restarting your device.

Check if the SSID broadcast is enabled on your router. If it’s not, you won’t see your network in the list of available networks. You can enable SSID broadcast in your router’s settings.

If you still can’t see your network, try moving closer to the router or modem to see if that helps. Sometimes, distance can affect the signal strength.

Another option is to reset your network settings. This can often resolve connectivity issues. Go to your device’s settings and look for the option to reset network settings.

Restarting Devices and Services

If you can’t see your WiFi network in the list of available networks, try restarting your devices and services. First, power cycle your router by unplugging it from the power source, waiting for 30 seconds, and then plugging it back in. This can help reset the connection and refresh the network list on your device.

Next, restart your computer or device that you are trying to connect to the WiFi network. Sometimes a simple reboot can solve connectivity issues and allow your device to detect the network.

If you still can’t see your WiFi network, check if there are any software updates available for your router or device. Updating the firmware or software can sometimes resolve network visibility problems.

Lastly, make sure that your WiFi network is not hidden or set to private. Check the settings on your router to ensure that the SSID broadcast is enabled so that your network shows up in the list of available networks.

Updated: February 2024

Fortect can help with the issue of not being able to see your wireless network in the list by addressing potential Windows issues that may be causing the problem. It can repair damaged system files and faulty settings that could be hindering the network visibility.

Additionally, Fortect can address any virus damage or freezing computer issues that may be impacting your ability to connect to your wireless network.

Updating Network Drivers

To update your network drivers, follow these steps:

1. Open Device Manager by pressing Windows key + X and selecting Device Manager from the menu.

2. Locate your network adapter under the Network adapters section.

3. Right-click on your network adapter and select Update driver.

4. Choose to automatically search for updated driver software.

5. If a new driver is found, follow the on-screen instructions to install it.

6. Restart your computer after the driver update is complete.

By updating your network drivers, you may be able to resolve the issue of not being able to see your Wi-Fi network in the list of available networks. If the problem persists, consider troubleshooting other possible causes such as signal interference or router settings.

Resetting Modems and Routers

If you can’t see your WiFi network in the list of available networks, try resetting your modem and router. First, unplug both devices from the power source. Wait for about 30 seconds before plugging them back in. This process, known as power cycling, can help resolve connectivity issues.

After power cycling, wait a few minutes for the devices to fully reboot. Check your device to see if your WiFi network is now visible. If not, try restarting your device as well.

If you still can’t see your WiFi network, it may be helpful to contact your Internet service provider for further troubleshooting. They may be able to provide additional guidance or check for any service outages in your area.

Troubleshooting Network Settings

  • Make sure WiFi is turned on in device settings
  • Ensure device is not in airplane mode

Restart Device

  • Turn device off and then back on
  • Reset network settings

Move Closer to Router

  • Ensure device is within range of WiFi signal
  • Check for any physical obstructions blocking signal

Update Network Drivers

  • Open Device Manager by pressing Windows key + X
  • Find network adapters and update drivers

Reset Router

  • Unplug router for 30 seconds and then plug back in
  • Reset router to factory settings
    Unplug router for 30 seconds and then plug back in
Reset router to factory settings

Checking for Interferences and Hidden Networks

If you can’t see your WiFi network in the list of available networks, there may be interference or hidden networks causing the issue.

Check for any physical obstructions or electronic devices that could be causing interference with your WiFi signal.

Make sure your router is in a central location and not blocked by walls or furniture.

Scan for hidden networks by adjusting your WiFi settings to display all available networks.

Consider changing your WiFi channel to reduce interference from other nearby networks.

If you suspect malware or other security issues, run a thorough antivirus scan on your device.

By addressing these potential interferences and hidden networks, you should be able to see your WiFi network in the list of available networks again.

F.A.Qs

Why is my wireless network not showing up?

Your wireless network may not be showing up because your wireless hardware could be turned off or not working properly. Make sure it is turned on and try moving closer to the wireless base station/router to see if the network appears in the list.

Why can’t my device find my Wi-Fi network?

Your device may not be able to find your Wi-Fi network because your router may be unplugged or the power may be cut off. Restarting your router or plugging it back in could be a simple solution. Additionally, check if your devices are trying to connect to a different network.

Why is my Wi-Fi network hidden?

Your Wi-Fi network is hidden because it has been intentionally configured to not broadcast its SSID, which is a common security measure to reduce visibility of the network.

How do I manually add a wireless network?

To manually add a wireless network on Android, you can go to the Wi-Fi settings in the notification bar, select a network, tap on “Add Network,” and enter the password.

Example Message
?

If you can’t see your wireless network in the list, try restarting your router and checking if the network visibility settings are correctly configured. Download this tool to run a scan

Fix Pokemon Go Error 12 Failed to Detect Location 2024

Experiencing the Pokemon Go Error 12 Failed to Detect Location 2024 can be frustrating for players trying to enjoy the game.

Important
Fortect may help address missing files or damaged settings that lead to location not found 12 pokemon go error.

Download Now

Importance of Location in Gameplay

Location is a crucial aspect of gameplay in Pokémon Go. The game relies heavily on GPS signals to determine a player’s location in the real world, which in turn affects their in-game experience.

Without accurate location detection, players may encounter errors such as Error 12, which can prevent them from playing the game properly. This error is often linked to issues with the device’s GPS signal or location settings.

It is important to ensure that your device’s GPS settings are enabled and that you have a clear line of sight to GPS satellites. Additionally, checking for any software updates or patches that may improve location detection can help resolve Error 12.

In some cases, using tools like Magisk or joysticks to spoof your location can also trigger Error 12. It’s crucial to play the game ethically and within the terms of service to avoid encountering this error.

By prioritizing the accuracy of your location settings and respecting the game’s mechanics, you can enjoy a seamless Pokémon Go experience without facing Error 12.

Common Causes of Location Errors

Make sure your GPS is enabled and set to high accuracy mode in your device settings. Additionally, ensure that Pokemon Go has permission to access your device’s location.

If you are using an iPhone, check that your iOS software is up to date. For Android users, make sure your device is running on the latest version of the operating system.

Clear the cache of the Pokemon Go app and restart your device to refresh the GPS connection.

Avoid using any unauthorized software like Magisk or joystick apps, as they can interfere with the game’s location detection.

If you are still experiencing location errors, consider checking for any updates or patches released by Niantic, Inc.

Updated: February 2024

Fortect can help with the “location not found 12” error in Pokemon Go by repairing damaged system files and settings that may be causing the issue. It can also address freezing programs or slowdowns that may be hindering the game’s performance.

Additionally, Fortect can automatically fix missing or corrupt DLL files, which are essential for proper program functioning. By restoring the system to its pre-infected state, Fortect can potentially resolve the error and allow for smoother gameplay.

Solutions for Android Devices

  • Go to Settings on your Android device.
  • Tap on Apps.
  • Find Pokemon Go in the list of apps and tap on it.
  • Tap on Storage.
  • Tap on Clear Cache and then tap on Clear Data.

Enable Mock Locations

  • Go to Settings on your Android device.
  • Tap on About Phone.
  • Find Build Number and tap on it multiple times until you see a message saying you are now a developer.
  • Go back to Settings and tap on Developer Options.
  • Find Mock Location app and select Pokemon Go from the list.

Check Location Settings

  • Go to Settings on your Android device.
  • Tap on Location.
  • Make sure Location is turned on and set to High Accuracy.
  • Restart your device after changing the settings.

Solutions for iOS Devices

If you are experiencing the Pokemon Go Error 12 “Failed to Detect Location 2024” on your iOS device, there are a few solutions you can try to fix the issue.

1. Check your internet connection: Make sure you have a stable internet connection, as a weak or unstable connection can cause this error.

2. Restart your device: Sometimes simply restarting your iOS device can resolve the issue.

3. Update the Pokemon Go app: Make sure you are using the latest version of the app, as outdated versions can sometimes cause errors.

If the error persists, you can try to uninstall and reinstall the app, or reset your network settings on your device.

Restarting and Resetting Tips

If you are experiencing the Pokemon Go Error 12 Failed to Detect Location 2024, try restarting and resetting your device to fix the issue.

Restart your device by turning it off and then turning it back on. This can help refresh the system and potentially resolve the error.

If restarting doesn’t work, reset the app’s cache by going to Settings > Apps > Pokemon Go > Storage > Clear Cache. This can sometimes clear up any issues with the app’s data.

You can also try resetting your GPS settings by going to Settings > Location > Advanced > Google Location Accuracy and toggling the setting off and then back on.

If the error persists, you may need to check for any software updates for both the Pokemon Go app and your device’s operating system. Keeping your software up to date can help prevent errors like this from occurring.

Frequently Asked Questions

Why does it say no location found on Pokemon go?

It says “no location found” on Pokemon Go because your device’s location services may be off. To fix this, go into your device’s settings, turn on location services, then close and refresh the app.

How do you fix the wrong location in Pokemon go?

To fix the wrong location in Pokemon Go, you can ensure that you are using a supported device, have a strong signal strength, play in urban areas, and enable the “Improve Location Accuracy” setting on Android devices.

Why can’t i spoof on Pokemon Go?

I can’t spoof on Pokemon Go because it goes against Niantic, Inc.’s Player Guidelines and Terms of Service. Although it’s technically possible, it usually requires rooting your Android or jailbreaking your iOS device.

How do I fix GPS not found in Pokemon?

To fix GPS not found in Pokemon, you can check and turn on your device’s location services. Simply go to your device’s settings and navigate to the Privacy section for iOS or Location for Android. Make sure to switch on the location services and restart the app before trying to play the game again.

Example Message
?

Sorry, but it seems that the location you are trying to find in Pokemon Go is not available. Download this tool to run a scan

Fix Windows Update Error 8024000B on Windows 11/10

Are you encountering Windows Update Error 8024000B on your Windows 11/10 system?

Important
Fortect may be able to address error 8024000b by repairing damaged system files and faulty settings that cause issues.

Download Now

Running Cleanup PowerShell Script for Superseded Updates

PowerShell command prompt

To fix Windows Update Error 8024000B on Windows 11/10, you can run a cleanup PowerShell script for superseded updates. This script helps remove unnecessary updates that may be causing the error. Follow these steps:

1. Open PowerShell as an administrator by searching for “PowerShell” in the Start menu, right-clicking on “Windows PowerShell,” and selecting “Run as administrator.”
2. In the PowerShell window, copy and paste the following command and press Enter: Get-WindowsUpdateLog
3. This command will generate a log file. Note the file path displayed in the PowerShell window.
4. Open File Explorer and navigate to the log file’s location. Double-click the file to open it in a text editor.
5. Use the search function in the text editor and look for the error code “8024000B.” This will help you identify the problematic updates.
6. Once you’ve identified the superseded updates causing the error, you can run the cleanup script. Copy and paste the following command into the PowerShell window, replacing “KBXXXXXXX” with the update’s KB number: DISM.exe /Online /Remove-Package /PackageName:Package_for_RollupFix~31bf3856ad364e35~amd64~~XXXXXXX.~~.~~.~~ /norestart
7. Press Enter to execute the command and remove the update.
8. Repeat step 6 for each superseded update causing the error.
9. After removing the updates, restart your computer and check if the Windows Update Error 8024000B is resolved.

By running the cleanup PowerShell script for superseded updates, you can fix the Windows Update Error 8024000B on Windows 11/10.

Updated: February 2024

Fortect is a powerful tool that can address error 8024000b and its specific aspects. Whether it’s damaged system files, faulty settings, or confusing issue messages, Fortect repairs them all to ensure normal tasks run smoothly. It also tackles the lingering damage caused by viruses and malware, securing the system and restoring it to its pre-infected state.

Additionally, Fortect fixes issues that lead to freezing programs, damaged DLLs, and even the severe Blue Screen of Death (BSoD). It also compares the current OS with a healthy version, allowing for a safe and efficient recovery without affecting user data.

Renaming the Spupdsvc.exe File

Windows file renaming

To fix Windows Update Error 8024000B on Windows 11/10, one potential solution is to rename the Spupdsvc.exe file. Follow these steps:

1. Open File Explorer and navigate to the following location: C:\Windows\System32.
2. Locate the Spupdsvc.exe file in the folder.
3. Right-click on the file and select Rename.
4. Change the file name to “Spupdsvc.old” or any other name of your choice.
5. Confirm the change by pressing Enter.
6. Restart your computer.

Renaming the Spupdsvc.exe file can resolve conflicts and errors related to Windows Update. This procedure is particularly helpful when encountering Error 8024000B.

Using the Windows Updates Troubleshooter

If you’re encountering the Windows Update Error 8024000B on Windows 11/10, you can use the Windows Updates Troubleshooter to resolve the issue. The troubleshooter is a built-in tool that can automatically detect and fix common Windows Update problems.

To use the Windows Updates Troubleshooter, follow these steps:

1. Press the Windows key + I to open the Settings app.
2. Go to “Update & Security” and click on “Troubleshoot” in the left sidebar.
3. Scroll down and click on “Windows Update” under “Get up and running.”
4. Click on “Run the troubleshooter” and wait for the tool to detect and fix any issues.
5. Once the troubleshooter completes its process, restart your computer and check if the error is resolved.

Using the Windows Updates Troubleshooter can help you quickly identify and fix the Windows Update Error 8024000B, ensuring your system stays up to date and secure.

Understanding Windows Update Processes

  1. Press Win + R to open the Run dialog box.
  2. Type services.msc and press Enter.
  3. In the Services window, scroll down and locate Windows Update.
  4. Right-click on Windows Update and select Stop.
  5. Next, right-click on Windows Update again and select Start.
  6. Close the Services window and check if the Windows Update error 8024000B is resolved.

Repair Method 2: Clear Windows Update Cache

  1. Press Win + R to open the Run dialog box.
  2. Type services.msc and press Enter.
  3. In the Services window, locate Windows Update and right-click on it.
  4. Select Stop to stop the Windows Update service.
  5. Open File Explorer and navigate to the following path: C:\Windows\SoftwareDistribution.
  6. Delete all the files and folders present in the SoftwareDistribution folder.
  7. Go back to the Services window, right-click on Windows Update, and select Start to restart the service.
  8. Check if the error 8024000B is resolved after clearing the Windows Update cache.

Repair Method 3: Run Windows Update Troubleshooter

  1. Press Win + I to open the Settings app.
  2. Click on Update & Security.
  3. In the left pane, select Troubleshoot.
  4. Scroll down and click on Additional troubleshooters.
  5. Click on Windows Update and then click on Run the troubleshooter.
  6. Follow the on-screen instructions and let the troubleshooter detect and fix any issues related to Windows Update.
  7. After the troubleshooter completes, restart your computer and check if the error 8024000B is resolved.

F.A.Qs

How do I fix potential Windows Update database error?

To fix potential Windows Update database errors, you can try the following solutions:

1. Run the Windows Update Troubleshooter: Use the built-in troubleshooter tool to automatically detect and fix common issues with Windows Update.

2. Reset the Windows Update components: Stop the Windows Update service, clear the temporary update files, and restart the service to reset the update components.

3. Check for sufficient disk space: Ensure that you have enough free space on your system drive as Windows Update requires space to download and install updates.

4. Disable third-party antivirus software: Temporarily disable any antivirus or firewall software that may be interfering with the Windows Update process.

5. Perform a clean boot: Start your computer with only essential services and startup programs to eliminate any conflicts that might be causing the database error.

Remember to always create a backup before making any changes to your system to avoid any potential data loss.

How do I fix 0x80240020 (- 2145124320?

To fix 0x80240020 (-2145124320), consider upgrading drivers and uninstalling any incompatible apps. For managed workstations, report compatibility issues to CCIT Imaging and PC Management.

How do I get rid of install error 0x800f020b?

To resolve the install error 0x800f020b, you can follow these steps:

1. Make sure your internet connection is stable and reliable.
2. Check for any pending Windows updates and install them.
3. Run the Windows Update troubleshooter to identify and fix any issues.
4. Temporarily disable any antivirus or firewall software that may be interfering with the installation process.
5. Use the Deployment Image Servicing and Management (DISM) tool to repair any corrupted system files.
6. If all else fails, you may need to perform a clean installation of Windows.

How do I fix Windows Update download error 0x80004002?

To fix Windows Update download error 0x80004002, you can try running the Windows Update troubleshooter or resetting the Windows Update components.

Example Message
?

To resolve error 8024000b, try restarting your computer and then checking for Windows updates again. Download this tool to run a scan

PS4 Mic Headset Sale

Looking for a great deal on a PS4 mic headset? Look no further!

Important
Fortect addresses freezing programs and missing DLLs, ensuring smooth operation and automatic fixes for damaged files.

Download Now

Top Deals and Latest Trends

PS4 Mic Headset on sale

Best Buy is a great place to start your search. They offer a wide selection of PS4 mic headsets at competitive prices. Check their website or visit a store near you to explore their current deals and discounts.

If you’re located in Canada, you can also check out local retailers like EB Games or Amazon.ca. They often have special promotions and sales on PS4 headsets.

For those in the United States, besides Best Buy, you can also check out online marketplaces like Amazon.com or Newegg. These platforms offer a wide range of options and often have customer reviews to help you make an informed decision.

When looking for a PS4 mic headset, consider the features you need. Look for headsets with a built-in microphone for clear communication with your teammates during multiplayer games. Additionally, pay attention to the audio quality and comfort of the headset.

Stay up to date with the latest trends in PS4 mic headsets. Follow gaming forums, YouTube channels, and social media accounts dedicated to gaming to get insights and recommendations from fellow gamers.

Don’t miss out on the best deals and latest trends for PS4 mic headsets. Take advantage of the resources available to you and find the perfect headset for your gaming needs.

Updated: February 2024

Fortect is a powerful program that can help address and resolve the pas4 mic error. It tackles various specific aspects of the error, such as damaged system files, faulty settings, and missing DLL files.

Additionally, Fortect repairs the causes of annoying slowdowns, freezing programs, and the dreaded Blue Screen of Death (BSoD). It also ensures that Windows and other programs run smoothly, while comparing the current operating system with a healthy version for seamless OS recovery.

Enhancing Recording Quality

If you’re looking to enhance the recording quality of your PS4 mic headset, there are a few tips and tricks you can try. First, make sure your headset is properly connected to your PS4 and that the audio settings are adjusted correctly. Check for any updates or firmware upgrades for your headset, as these can often improve performance.

Next, consider the positioning of your microphone. Make sure it is close enough to your mouth to capture clear audio, but not so close that it picks up unwanted background noise. Experiment with different microphone positions to find the optimal setup for your voice and recording environment.

If you’re still not satisfied with the recording quality, you may want to consider investing in a higher quality headset or microphone. Look for headsets that are specifically designed for recording or broadcasting, as these often have better audio quality and noise cancellation features.

In terms of purchasing options, there are many online retailers that offer PS4 mic headsets for sale. Some popular options include Amazon, Best Buy, and GameStop. If you’re located in Canada, you can check out retailers like Walmart or EB Games. For those in the United States, Walmart, Target, and GameStop are also good options.

Product Features

PS4 mic headset

  • No sound from headset:
    • Check the volume settings on both the PS4 and the headset.
    • Make sure the headset is properly connected to the controller.
    • Try using a different headset or controller to see if the issue is with the headset or the controller.
      Make sure the headset is properly connected to the controller.
Try using a different headset or controller to see if the issue is with the headset or the controller.
    • Restart the PS4 and try again.
  • Poor sound quality:
    • Ensure that the headset is securely plugged into the controller.
    • Check for any damage to the headset cable.
    • Adjust the volume levels on both the PS4 and the headset.
    • Try using a different headset or controller to determine if the issue lies with the headset or the controller.
      Adjust the volume levels on both the PS4 and the headset.
Try using a different headset or controller to determine if the issue lies with the headset or the controller.
  • Mic not working:
    • Make sure the mic is securely connected to the headset.
    • Check the microphone settings on the PS4.
    • Try using a different mic to see if the issue is with the mic or the controller.
    • Restart the PS4 and test the mic again.
      Try using a different mic to see if the issue is with the mic or the controller.
Restart the PS4 and test the mic again.
  • Interference or static:
    • Ensure there are no wireless devices or other sources of interference nearby.
    • Check the headset cable for any damage or loose connections.
    • Adjust the volume levels on both the PS4 and the headset.
    • Try using a different headset or controller to see if the issue persists.
      Adjust the volume levels on both the PS4 and the headset.
Try using a different headset or controller to see if the issue persists.

Technical Specifications

PS4 controller and headset

Product Brand Compatibility Connectivity Microphone Price
PS4 Mic Headset Various PlayStation 4 Wired or Wireless Boom microphone $X.XX

FAQs

Is there a mic on the PS4?

Yes, there is a microphone on the PS4, although its power is limited.

Does DS4 have a mic?

No, the DS4 controller does not have a microphone.

Example Message
?

I highly recommend investing in a pas4 mic for crystal clear audio quality during your performances or recordings. Download this tool to run a scan

Lenovo Laptop WiFi Connection Issues

Having trouble with your Lenovo laptop’s WiFi connection? Let’s dive into the common issues and effective solutions.

Important
Fortect can address issues with a Lenovo laptop not connecting to WiFi by repairing faulty settings or damaged system files.

Download Now

Basic Troubleshooting Steps

Step-by-step troubleshooting guide

1. Check Wi-Fi Connection: Ensure that your Lenovo laptop is connected to a Wi-Fi network. Look for the Wi-Fi icon in the system tray or the network settings in the Control Panel. If not connected, click on the Wi-Fi icon and select your desired network to connect to.

2. Restart Your Laptop: Sometimes, a simple restart can fix connectivity issues. Close all open programs and files, click on the “Start” button, and choose “Restart” from the context menu. Wait for your laptop to reboot and then try connecting to Wi-Fi again.

3. Check Airplane Mode: Make sure Airplane Mode is turned off. Press the Windows key + A to open the Action Center, and click on the Airplane Mode icon to toggle it off if it’s enabled. Airplane Mode disables all wireless connections, including Wi-Fi.

4. Update Wi-Fi Drivers: Outdated or incompatible Wi-Fi drivers can cause connection problems. Open the Device Manager by pressing the Windows key + X and selecting “Device Manager” from the menu. Expand the “Network Adapters” category, right-click on your Wi-Fi adapter, and choose “Update driver.” Follow the on-screen instructions to update the driver.

5. Reset Network Settings: Resetting the network settings can often resolve Wi-Fi connection issues. Press the Windows key + X and select “Command Prompt (Admin)” from the menu. In the Command Prompt window, type netsh winsock reset and press Enter. Restart your laptop after the process completes.

6. Disable Power Saving Mode: Power saving settings can sometimes interfere with Wi-Fi connectivity. Press the Windows key + X and select “Power Options” from the menu. Click on “Change plan settings” next to your active power plan, and then select “Change advanced power settings.” Expand the “Wireless Adapter Settings” category and set both “On battery” and “Plugged in” options to “Maximum Performance.” Click Apply and OK to save the changes.

7. Check for Physical Obstructions: Move closer to your router to rule out any physical obstructions that may be blocking the Wi-Fi signal. Also, ensure that your laptop is within the range of the router.

8. Restart Your Router: Unplug your router from the power source, wait for about 30 seconds, and then plug it back in. Wait for the router to reboot completely before attempting to connect to Wi-Fi again.

9. Contact Lenovo Support: If none of the above steps resolve the Wi-Fi connection issues, it may be time to contact Lenovo support. Check your laptop’s warranty status and reach out to Lenovo for further assistance.

Updated: February 2024

If you’re experiencing issues with your Lenovo laptop not connecting to WiFi, Fortect can help. It addresses the causes of connectivity problems such as damaged system files and faulty settings. Additionally, it can repair any damage caused by viruses or malware, ensuring your system is restored to its pre-infected state.

Fortect also addresses freezing or slow programs, damaged DLL files, and even resolves the Blue Screen of Death (BSoD) by fixing compatibility issues and identifying malfunctioning hardware. It can also assist with OS recovery without affecting user data.

Ensure Your Wireless Adapter is Enabled

1. Open the Start menu and search for “Device Manager.”
2. Click on “Device Manager” in the search results to open the Device Manager window.
3. Expand the “Network adapters” section to see a list of network adapters installed on your laptop.
4. Look for your wireless adapter, which may be labeled as “Wireless LAN” or something similar.
5. If the wireless adapter is disabled, it will have a down arrow icon next to it. Right-click on the adapter and select “Enable” from the context menu. Alternatively, you can also enable the adapter by double-clicking on it and selecting the “Enable” button on the device properties window.
6. Once the adapter is enabled, the down arrow icon should disappear, indicating that the adapter is now active.
7. Try connecting to your Wi-Fi network again to see if the issue is resolved.

If you’re still experiencing connection issues, there may be other factors at play. It’s worth considering the following troubleshooting steps:

1. Make sure that the Wi-Fi switch on your laptop is turned on. This switch is usually located on the side or front of the laptop.
2. Check that the wireless function key on your laptop’s keyboard is not disabled. Look for a key with an antenna or wireless symbol on it and press it to toggle the wireless function on or off.
3. Restart your laptop and try connecting to your Wi-Fi network again.
4. Update your wireless adapter driver. Visit the Lenovo website and search for your laptop model to find the latest driver for your wireless adapter. Download and install the driver following the instructions provided.
5. Check for any physical obstructions or interference that may be affecting your Wi-Fi signal. Move closer to your router or remove any objects that could be blocking the signal.
6. If possible, try connecting to a different Wi-Fi network or using a wired Ethernet connection to determine if the issue is specific to your network or adapter.
7. Consider resetting your router or contacting your internet service provider for assistance if other devices are also experiencing connection issues.

If you’re still unable to resolve the issue, it may be necessary to contact Lenovo support or take your laptop to a professional for further diagnosis and repair.

Update and Manage Your Wireless Network Drivers

Wireless network signal bars

1. Open the Device Manager by pressing the Windows key + X and selecting “Device Manager” from the menu.

2. In the Device Manager window, locate and expand the “Network adapters” category.

3. Right-click on your wireless network adapter and select “Update driver.”

4. Choose the option to search automatically for updated driver software. Windows will then search for the latest driver for your wireless adapter and install it if one is found.

5. If Windows doesn’t find a new driver, you can try downloading the latest driver from the Lenovo support website. Go to the Lenovo website, navigate to the support page for your specific laptop model, and download the latest wireless network driver.

6. Once the driver is downloaded, double-click on the downloaded file and follow the on-screen instructions to install it.

7. After the driver installation is complete, restart your laptop to apply the changes.

To manage your wireless network drivers, you can also use the Lenovo Vantage software. This software provides an easy way to update and manage drivers for your Lenovo laptop. Here’s how to use it:

1. Download and install the Lenovo Vantage software from the Lenovo support website.

2. Launch the Lenovo Vantage software and navigate to the “Hardware Settings” section.

3. Under the “Hardware Settings” section, click on the “Device” tab.

4. In the Device tab, you will see a list of all the hardware devices on your laptop, including the wireless network adapter.

5. Locate the wireless network adapter in the list and click on it.

6. In the wireless network adapter settings, you will find options to update the driver, enable or disable the adapter, and troubleshoot any issues.

7. Click on the “Update” button to check for any available driver updates for your wireless network adapter.

8. If a new driver is found, follow the on-screen instructions to download and install it.

Review and Adjust Power Management Settings

To fix Lenovo laptop WiFi connection issues, it is important to review and adjust the power management settings. These settings can sometimes interfere with the WiFi connection and cause connectivity problems. Here’s how you can review and adjust the power management settings on your Lenovo laptop:

1. Open the Windows 10 Start menu and search for “Power Options.”
2. Click on “Power Options” to open the Power Settings.
3. In the Power Options window, you will see different power plans. Make sure the “Balanced (recommended)” power plan is selected.
4. Click on “Change plan settings” next to the Balanced power plan.
5. On the next screen, click on “Change advanced power settings.”
6. In the Advanced settings window, scroll down and expand the “Wireless Adapter Settings.”
7. Expand the “Power Saving Mode” option.
8. Make sure the “Maximum Performance” option is selected for both “On battery” and “Plugged in.”
9. Click on “Apply” and then “OK” to save the changes.

By adjusting the power management settings, you are ensuring that your Lenovo laptop’s WiFi adapter is always performing at its maximum potential, without any power-saving restrictions.

If you are still experiencing WiFi connection issues after adjusting the power management settings, there are a few additional troubleshooting steps you can try:

1. Update your device drivers: Outdated or incompatible drivers can cause WiFi connection problems. Visit the Lenovo support website and download the latest drivers for your laptop’s WiFi adapter.

2. Disable Wireless Zero Configuration: Wireless Zero Configuration is a Windows service that can sometimes interfere with WiFi connections. To disable it, press the Windows key + R to open the Run dialog box. Type “services.msc” and press Enter. In the Services window, scroll down and double-click on “Wireless Zero Configuration.” In the properties window, set the Startup type to “Disabled” and click on “OK.”

3. Restart your router: Sometimes, the issue may not be with your laptop but with the router. Unplug the router from the power source, wait for a few seconds, and then plug it back in. This can help refresh the connection and resolve any temporary issues.

Remember to check if your WiFi is working on other devices like smartphones or another computer. If the issue persists only on your Lenovo laptop, it is likely a problem with the laptop itself.

If you have recently installed any new software or made changes to the operating system, you can also try performing a system restore to a previous point when the WiFi connection was working fine.

In case none of these troubleshooting steps work, it is recommended to contact Lenovo support or take your laptop to a professional for further assistance. If your laptop is still under warranty, you may be eligible for free repairs or replacements.

By reviewing and adjusting the power management settings on your Lenovo laptop, you can potentially resolve WiFi connection issues and ensure a smooth and uninterrupted internet experience.

F.A.Q.

Why is my Lenovo laptop not connecting to Wi-Fi?

Your Lenovo laptop may not be connecting to Wi-Fi because of incorrect network name (SSID) or password. You can try resolving this issue by restarting both your router and laptop. Power off both devices, wait for a few seconds, and then turn them back on.

Why is my laptop suddenly not connecting to Wi-Fi?

Your laptop may suddenly not be connecting to Wi-Fi due to several common issues. These can include your device being in airplane mode or having Wi-Fi turned off, your router being down, or you may be entering an incorrect Wi-Fi password.

Example Message
?

If your Lenovo laptop is unable to connect to WiFi, it might be due to a problem with the network adapter or a misconfiguration in your laptop’s settings. Download this tool to run a scan