In this article, I will discuss how to fix the “Windows 7 Build 7601 Not Genuine Error.”

April 2024: Enhance your computer’s performance and eliminate errors with this cutting-edge optimization software. Download it at this link

  1. Click here to download and install the optimization software.
  2. Initiate a comprehensive system scan.
  3. Allow the software to automatically fix and repair your system.

Verify your Windows license: Check if your Windows license is genuine by going to the Control Panel, then System and Security, and finally System. Look for the “Windows activation” section and ensure that it displays “Windows is activated” with a valid license key.

Understanding the “Windows Is Not Genuine” Error

Windows error message

If you’re seeing the “Windows Is Not Genuine” error on your Windows 7 Build 7601, there are a few steps you can take to resolve it.

First, it’s important to understand that this error message typically appears when your computer’s operating system is not properly activated. This can happen if you are using an unauthorized or counterfeit copy of Windows, or if there is an issue with your product key.

To fix this error, follow these steps:

1. Check your product key: Open the Control Panel, go to System and Security, and click on System. Here, you can verify if your product key is valid. If it’s not, you may need to purchase a genuine copy of Windows.

2. Activate Windows: If your product key is valid, you can try activating Windows again. Go to the Control Panel, click on System and Security, and then select System. Click on “Activate Windows” and follow the on-screen instructions.

3. Run a system scan: Sometimes, this error can be caused by malware or other system issues. Use a reliable antivirus program to scan your computer for any potential threats.

4. Get help from Microsoft: If the above steps don’t resolve the issue, it’s recommended to contact Microsoft Support for further assistance.

Methods to Fix the “Windows Is Not Genuine” Error

Windows activation screen

  1. Open Command Prompt as an administrator.
  2. Type the command SLMGR -REARM and press Enter.
  3. Restart the computer.

Method 2: Use the SFC Scan Command

  1. Open Command Prompt as an administrator.
  2. Type the command sfc /scannow and press Enter.
  3. Wait for the scan to complete.
  4. Restart the computer.

Method 3: Uninstall Recent Windows Updates

  1. Open the Control Panel.
  2. Go to Programs and click on Uninstall a program.
  3. Click on View installed updates.
  4. Locate the recently installed Windows update.
  5. Right-click on the update and select Uninstall.
  6. Restart the computer.

Method 4: Use System Restore

  1. Open the Control Panel.
  2. Go to System and Security.
  3. Click on System.
  4. Click on System Protection in the left pane.
  5. Click on System Restore.
  6. Select a restore point before the “Windows Is Not Genuine” error occurred.
  7. Follow the on-screen instructions to complete the system restore process.

Uninstalling the KB971033 Update

Error message indicating uninstallation of KB971033 update

To uninstall the KB971033 update and fix the Windows 7 Build 7601 Not Genuine error, follow these steps:

1. Click the Start menu and open the Control Panel (Windows).
2. In the Control Panel, select “Programs” or “Programs and Features.”
3. Locate and click on “View installed updates” or “Installed Updates” in the left-hand menu.
4. Scroll through the list of updates and look for “Update for Microsoft Windows (KB971033).”
5. Right-click on the update and select “Uninstall” from the context menu.
6. Follow the on-screen instructions to complete the uninstallation process.
7. Restart your computer to apply the changes.

Once your computer restarts, the KB971033 update should be removed, and the Windows 7 Build 7601 Not Genuine error should be resolved.

Updated: April 2024

Fortect is designed to address a range of Windows issues, but it may not be able to fix the specific problem of “build 7601 windows is not genuine.” However, it can help with other issues that may be causing system errors or confusion.

Fortect repairs damaged system files and faulty settings, secures the system after virus damage, addresses freezing programs, fixes damaged DLL files, repairs causes of Blue Screen of Death, and can assist with OS recovery.

Using SLMGR -REARM Command to Reset Licensing Status

If you’re encountering the “Windows 7 Build 7601 Not Genuine” error, you can use the SLMGR -REARM command to reset the licensing status of your operating system. This command allows you to extend the activation grace period of your Windows 7 installation, resolving the error message.

To use the SLMGR -REARM command, follow these steps:

1. Click the Start menu and type “cmd” in the search box.
2. Right-click on “cmd.exe” in the search results and select “Run as administrator”.
3. In the command prompt window, type “SLMGR -REARM” (without quotes) and press Enter.
4. You will see a confirmation message indicating that the command was successful.
5. Restart your computer for the changes to take effect.

It’s important to note that using the SLMGR -REARM command can only be done a limited number of times, so it’s not a permanent solution. If the error persists after using the command, you may need to consider other troubleshooting methods or contact Microsoft support for further assistance.

Disabling Automatic Windows Updates

Windows update settings

To disable automatic Windows updates on your Windows 7 Build 7601 system, follow these steps:

1. Open the Control Panel by clicking on the Start menu and selecting Control Panel.
2. In the Control Panel, click on “Windows Update” to open the Windows Update settings.
3. In the Windows Update settings, click on “Change settings” in the left-hand sidebar.
4. Under the “Important updates” section, select “Never check for updates (not recommended)” from the drop-down menu.
5. Click on “OK” to save the changes and close the Windows Update settings.

By following these steps, you have disabled automatic Windows updates on your Windows 7 Build 7601 system. It’s important to note that disabling automatic updates can leave your system vulnerable to security risks, so it’s recommended to manually check for updates regularly or consider upgrading to a newer version of Windows, such as Windows 10 or Windows 11, which offer more advanced security features and regular updates.

Verifying the Legitimacy of Your Computer License

Computer license verification screen

To fix the “Windows 7 Build 7601 Not Genuine” error, it’s important to verify the legitimacy of your computer license. Here are the steps to do so:

1. Open the Control Panel by clicking on the Start button and selecting Control Panel from the menu.

2. In the Control Panel, click on “System and Security” and then on “System.”

3. Look for the “Windows Activation” section. If it says “Windows is activated,” your license is legitimate. If it says “Windows is not activated,” continue with the next steps.

4. Click on “Change product key” under the “Windows Activation” section.

5. Enter your valid product key in the text box provided and click on “Next.”

6. Follow the on-screen instructions to complete the activation process.

7. Once the activation is successful, restart your computer for the changes to take effect.

Remember to always backup your important files before making any changes to your system. If you’re not sure about the legitimacy of your license, consider contacting Microsoft support for further assistance.

Additional Steps to Fix the “Windows Is Not Genuine” Error

To fix the “Windows Is Not Genuine” error on your Windows 7 Build 7601, follow these additional steps:

1. Open the Control Panel by clicking the Start button, selecting Control Panel, and then choosing System and Security.
2. Click on “System” and scroll down to the “Windows activation” section.
3. Click on the “Change product key” link and enter a valid product key for your version of Windows.
4. If you don’t have a valid product key, you can try using the “slmgr -rearm” command in an elevated Command Prompt to extend the grace period.
5. Restart your computer for the changes to take effect.

If these steps don’t resolve the issue, you may need to contact Microsoft Support for further assistance. Remember to back up your important files before making any changes to your system.

For more troubleshooting options and tools, visit the Microsoft website or consult the Windows documentation.

Common Questions and FAQs about the “Windows Is Not Genuine” Error

A screenshot of a Windows error message displaying This copy of Windows is not genuine

  • What does the “Windows Is Not Genuine” error mean? This error message indicates that the copy of Windows installed on your computer is not genuine or has not been properly activated.
  • Why am I seeing the “Windows Is Not Genuine” error? There are several reasons why this error may occur, such as using an unauthorized copy of Windows, a problem with the activation process, or changes in the system files.
  • How can I fix the “Windows Is Not Genuine” error? There are a few different methods you can try to resolve this error, including reactivating Windows, using the “slmgr” command, or using the Windows Activation troubleshooter.
  • Can I still use my computer if I see the “Windows Is Not Genuine” error? Yes, you can continue using your computer, but you may encounter limitations and restrictions until you resolve the error.
  • Will my files and data be affected by the “Windows Is Not Genuine” error? No, this error does not affect your personal files or data. However, it is still important to resolve the error to ensure proper functionality and access to all features of Windows.
  • Do I need to purchase a new license to fix the “Windows Is Not Genuine” error? Not necessarily. If you have a valid product key and license, you can reactivate Windows using the appropriate method. However, if you are using an unauthorized copy, you may need to purchase a genuine license.
  • What should I do if I have a genuine copy of Windows but still see the “Windows Is Not Genuine” error? In this case, it is recommended to contact Microsoft support for further assistance. They can help verify the authenticity of your copy and provide guidance on resolving the error.
  • Can I disable the “Windows Is Not Genuine” error message? While it is possible to disable the error message, it is not recommended as it does not resolve the underlying issue. It is better to address the error and ensure your copy of Windows is genuine and properly activated.
  • How can I avoid the “Windows Is Not Genuine” error in the future? To avoid encountering this error, it is important to use a genuine copy of Windows and activate it properly. Avoid using unauthorized copies or third-party activation tools, as they can lead to this error and other issues.
Example Message
?

If you are experiencing the “Build 7601 Windows is not genuine” message, you should consider reaching out to Microsoft support for assistance. Download this tool to run a scan

Was this article helpful?
YesNo