In troubleshooting RPC Server Unavailable in Performance Monitor, it is important to identify the root cause of the issue to effectively resolve it.
September 2024: Enhance your computer’s performance and eliminate errors with this cutting-edge optimization software. Download it at this link
- Click here to download and install the optimization software.
- Initiate a comprehensive system scan.
- Allow the software to automatically fix and repair your system.
Identifying Common Causes
- Check network connectivity:
- Ensure that the server and client are connected to the same network.
- Check for any network issues such as disconnected cables or faulty network adapters.
- Verify server availability:
- Check if the server is powered on and running.
- Ensure that the server is not experiencing any hardware or software failures.
- Review firewall settings:
- Check if the firewall is blocking RPC communication.
- Configure the firewall to allow RPC traffic.
- Check RPC service status:
- Open Services by pressing Win+R and typing services.msc.
- Locate the Remote Procedure Call (RPC) service and ensure it is running.
Ensuring Proper Configuration Settings
To ensure proper configuration settings for troubleshooting RPC Server Unavailable in Performance Monitor, follow these steps:
1. Check the network connectivity to ensure that the server hosting the RPC service is reachable from the client machine.
2. Verify that the RPC service is running on the server by checking the services list in the Windows Control Panel.
3. Ensure that the necessary firewall rules are in place to allow RPC traffic to pass through. Check both the Windows Firewall settings and any third-party firewall software that may be installed.
4. Check the registry settings for the RPC service to make sure they are configured correctly. Incorrect registry settings can cause the RPC Server Unavailable error.
Verifying Connectivity and Security Permissions
| Step | Description | Result |
|---|---|---|
| 1 | Verify network connectivity to the server | Successful |
| 2 | Check firewall settings for any restrictions | No issues found |
| 3 | Ensure proper security permissions are set | Permissions verified |
| 4 | Test connectivity using telnet or ping | Connection successful |
Troubleshooting and Resolving Issues
– RPC Server Unavailable error
– Performance Monitor tool
– Troubleshooting steps
– Resolving issues
To troubleshoot and resolve the RPC Server Unavailable issue in Performance Monitor, follow these steps:
1. Check the RPC service: Make sure that the Remote Procedure Call (RPC) service is running on the target machine. You can do this by opening the Services console and verifying the status of the RPC service.
2. Verify network connectivity: Ensure that there are no network connectivity issues between the machine running Performance Monitor and the target machine. You can use tools like ping or tracert to check the network connectivity.
3. Restart the Performance Monitor tool: Sometimes, simply restarting the Performance Monitor tool can resolve the RPC Server Unavailable error. Close the tool and reopen it to see if the issue persists.
If the issue still persists after following these steps, you may need to further investigate the root cause of the problem. Consider checking for any firewall or security software blocking the RPC communication, as well as ensuring that the target machine is properly configured to allow remote monitoring.
Frequently Asked Questions
How to fix an RPC server is unavailable error?
To fix an RPC server is unavailable error, make sure all RPC services are running, check firewall settings, boot in normal startup, enable IPv6 and file & printer sharing, flush DNS cache, edit registry settings, and consider resetting your PC if needed.
How do I unblock RPC ports in my firewall?
To unblock RPC ports in your firewall, you can navigate to Computer Configuration, Administrative Templates, Network, Network Connections, Windows Firewall, and Domain Profile. From there, right-click on Windows Firewall: Allow remote administration exception, click Properties, enable it, and then click OK.
How do I restart the RPC service?
To restart the RPC service, you need to locate the “Remote Procedure Call (RPC)” service in the Services window and then right-click on it to select “Restart” from the menu.
How do I check my RPC server port?
To check your RPC server port, you can use the PortQry tool in the command prompt. This tool tests the RPC Server, queries the host port, and provides a list of ports and their status, including RPC Dynamic ports via the RPC mapper.
