In this article, I will discuss how to troubleshoot and fix the issue of “Unknown USB Device Set Address Failed.”
December 2024: Enhance your computer’s performance and eliminate errors with this cutting-edge optimization software. Download it at this link
- Click here to download and install the optimization software.
- Initiate a comprehensive system scan.
- Allow the software to automatically fix and repair your system.
Update USB Drivers
To fix the “Unknown USB Device Set Address Failed” error, one common solution is to update your USB drivers. Outdated drivers can often cause connectivity issues with your devices.
To update your USB drivers, follow these steps:
1. Open Device Manager by pressing Windows key + X and selecting Device Manager from the menu.
2. Locate the Universal Serial Bus controllers section and expand it.
3. Right-click on the USB device showing the error and select Update Driver.
4. Choose to search automatically for updated driver software.
5. Follow the on-screen instructions to complete the driver update process.
Updating your USB drivers can often resolve the “Unknown USB Device Set Address Failed” error and improve the connectivity of your devices.
Troubleshoot Connection Issues
- Check the USB connection: Ensure that the USB device is properly connected to the port on your computer.
- Try a different USB port: Plug the device into a different USB port to see if the issue is with the port itself.
- Restart your computer: Sometimes a simple restart can resolve connection issues.
- Update USB drivers: Make sure your USB drivers are up to date to ensure compatibility with the device.
- Check for hardware conflicts: Ensure that there are no conflicts with other devices connected to your computer.
- Try a different USB cable: The issue may be with the USB cable itself, so try using a different one.
- Test the device on another computer: To determine if the problem is with the device or your computer, test it on another computer.
- Reset USB settings: Resetting the USB settings on your computer may help resolve the issue.
- Contact the manufacturer: If all else fails, reach out to the manufacturer for further assistance.
Adjust Power Management Settings
1. Go to the Control Panel on your computer.
2. Click on Power Options.
3. Select the High Performance power plan.
4. Click on Change plan settings.
5. Adjust the settings for turning off the display and putting the computer to sleep to longer periods of time.
6. Click on Save changes.
Inspect USB Ports and Cables
| Step | Description |
|---|---|
| 1 | Check for loose connections in the USB ports |
| 2 | Try using a different USB cable |
| 3 | Inspect the USB port for physical damage or debris |
| 4 | Test the USB device on another computer to rule out hardware issues |
| 5 | Update USB drivers on the computer |
F.A.Qs
How do I fix set address failed on USB?
To fix “set address failed” on USB, you can try checking Power Option settings, updating the USB device driver, using the Devices Troubleshooter, disabling Fast Startup, and scanning the PC for hardware changes.
How do you fix a failed USB port?
To fix a failed USB port, you can start by checking for physical damage on the ports or cables. Resetting the BIOS to factory defaults, running a hardware diagnostic test, and checking the USB device on another computer can also help troubleshoot the issue. Additionally, checking the Windows Device Manager for errors and running the Windows hardware troubleshooter can be beneficial in resolving the problem.
How do I fix a failed USB drive?
To fix a failed USB drive, start by checking for physical damage such as cracks or broken parts. Update the firmware, check the file system, run a virus scan, and use disk management if needed. Try using data recovery software, a different computer, and a different USB port as troubleshooting steps.
How do I fix a USB port reset request failed?
To fix a USB port reset request failed, you can start by searching for hardware changes, using the Hardware and Devices Troubleshooter, disabling Fast Startup, downloading the latest driver update, reinstalling all USB controllers drivers, disabling the USB Selective Suspend setting, and updating the BIOS.
