Author: Peter McCarthy

In my article, I will discuss how to fix Winsock Error 10061 by utilizing KB2482977 and winsock2, and explain why this error occurs.

Common Causes

1. Check for Network Connectivity:
   • Ensure that your internet connection is working properly.
   • Check if other devices on the same network are experiencing similar issues.
2. Disable Firewall:
   • Temporarily disable your firewall to see if it is the cause of the Winsock error.
   • If the error is resolved after disabling the firewall, you may need to adjust the firewall settings to allow the connection.
3. Reset Winsock Catalog:
   • Open Command Prompt as an administrator by searching for it in the Start menu, right-clicking on it, and selecting “Run as administrator.”
   • Type the following command and press Enter: netsh winsock reset
   • Restart your computer to apply the changes.
4. Reinstall KB2482977:
   • Go to the Windows Update section in the Control Panel and uninstall KB2482977.
   • Download the update from the Microsoft website and reinstall it.
5. Check for Malware:
   • Run a thorough antivirus scan on your computer to check for any malware that may be causing the Winsock error.
   • Remove any detected threats and restart your computer.

Steps to Fix

To fix Winsock error 10061, follow these steps:

Step 1: Check for any antivirus software that may be blocking the connection. Disable the antivirus temporarily to see if that resolves the issue.

Step 2: Make sure your computer network settings are correct. Check the IP address, subnet mask, and default gateway to ensure they are set up properly.

Step 3: Verify that the port you are trying to connect to is not being blocked by a firewall. Open the necessary port in your firewall settings.

Step 4: Run a registry cleaner to fix any corrupted or invalid entries that may be causing the Winsock error 10061.

Step 5: Scan your computer for any viruses or malware that could be causing the issue. Remove any threats found to ensure a clean system.

Step 6: Restart your computer to apply any changes made during the troubleshooting process.

Steps to Unblock

• Check your internet connection:
  • Make sure your internet connection is active and working properly.
  • Try accessing different websites to verify connectivity.
• Restart your computer:
  • Restart your computer to refresh network settings.
  • Allow your computer to fully restart before attempting to connect to the internet.
• Reset Winsock:
  • Open Command Prompt as an administrator.
  • Type the command netsh winsock reset and press Enter.
  • Restart your computer after the command has executed.
• Disable Firewall and Antivirus:
  • Temporarily disable your firewall and antivirus software.
  • Try to connect to the internet to see if the issue is resolved.
  • Remember to re-enable your firewall and antivirus after testing.

Prevent Server Crashes

One common solution to fix Winsock Error 10061 is to apply Microsoft’s KB2482977 update. This update addresses known issues with Winsock and can help resolve connectivity issues between the client and server. To install the update, follow these steps:

1. Download KB2482977 update from the Microsoft website.
2. Double-click on the downloaded file to start the installation process.
3. Follow the on-screen instructions to complete the installation.
4. Restart your computer to apply the changes.

In addition to applying the KB2482977 update, it is also recommended to check the winsock2 settings on your computer. Winsock2 is a programming interface that handles network connections in Windows operating systems. To check and reset the winsock2 settings, follow these steps:

1. Open Command Prompt as an administrator.
2. Type ‘netsh winsock reset’ and press Enter.
3. Restart your computer to apply the changes.

It is important to note that Winsock Error 10061 can also be caused by malware or registry issues. Running a registry cleaner can help identify and fix any registry errors that may be contributing to the error. Additionally, make sure to scan your computer for viruses and malware to ensure they are not causing connectivity issues.

FAQs

What is error establishing a connection 10061?

Error establishing a connection 10061 is a Connection Refused error typically caused by a misconfigured server, full server, or incorrect Port specified by the client.

What causes winsock errors?

Winsock errors are caused by attempting to bind to an address that is not valid for the local computer or by using an invalid remote address or port when connecting or sending data.

What is FTP connection error 10061?

FTP connection error 10061 occurs when the FTP server is not listening on the port, there is no FTP server running, or a firewall is blocking the connection.

Peter McCarthy

In this article, I will discuss how to fix a frozen screen share on Discord when the stream won’t load.

Restart Your Computer or Device

It’s important to give your device a fresh start to clear out any temporary issues that may be causing the Discord stream to freeze. Simply restarting your computer or device may be all that’s needed to get your stream running smoothly again.

If restarting doesn’t fix the problem, you can move on to other troubleshooting steps. But always start with a restart, as it’s a quick and easy way to potentially resolve the issue.

Verify Internet Connection Strength

To verify your internet connection strength, first check if you are connected to the internet. Open a new tab in your web browser and try loading a website to confirm.

If the website loads successfully, proceed to check the signal strength of your Wi-Fi connection. Look for the Wi-Fi icon on your device and ensure it shows a strong signal.

If you are using a wired connection, make sure the Ethernet cable is securely plugged into both your computer and the router.

You can also run a speed test online to check your internet connection speed. This will help determine if your internet connection is strong enough for streaming on Discord.

If your internet connection is weak or unstable, consider restarting your router or contacting your internet service provider for assistance. A strong internet connection is essential for smooth screen sharing on Discord.

Execute Discord with Administrator Privileges

1. Right-click on the Discord icon on your desktop or in the taskbar.

2. Select “Run as administrator” from the context menu.

3. Confirm any prompts that may appear.

By running Discord as an administrator, you may be able to resolve issues such as a frozen screen share during a stream. This action can grant Discord the necessary permissions to function properly and avoid software bugs that may be causing the problem. If the issue persists, consider troubleshooting other possible causes such as hardware acceleration settings or internet connectivity.

Disable Hardware Acceleration

To fix a frozen screen share on Discord, you can try disabling hardware acceleration. This feature uses your GPU to help with performance, but sometimes it can cause issues. To do this, go to Discord settings, then scroll down to the Appearance section. Here, you can toggle off hardware acceleration. After doing this, restart Discord to see if the issue is resolved.

If not, you may need to check for any updates or troubleshoot further.

Update Graphics and Network Drivers

Clear Discord’s Cache Files

1. Close Discord completely by right-clicking on the Discord icon in the taskbar and selecting “Quit Discord.”

2. Press “Ctrl + Shift + Esc” to open the Task Manager and end any Discord processes that may still be running.

3. Press “Windows key + R,” type “%appdata%” and hit Enter to open the AppData folder.

4. Navigate to the “Discord” folder, then the “Cache” folder, and delete all the files inside.

5. Restart Discord and try sharing your screen again to see if the issue is resolved.

Reinstall the Application

If your Discord stream is frozen and won’t load, a quick fix could be to reinstall the application. To do this, first, locate the Discord icon on your desktop or in your applications folder. Right-click on the icon and select “Uninstall. ” Once the application is uninstalled, go to the Discord website and download the latest version of the software.

Install it on your computer and log in with your credentials. This process can often resolve issues with frozen screen shares. If the problem persists, you may need to troubleshoot further or seek help from Discord support.

Adjust to Windowed or Borderless Mode

• Switch between windowed and borderless mode
• Open Discord settings
• Navigate to the “Appearance” tab
• Toggle between windowed and borderless mode
• Save changes and restart Discord

Frequently Asked Questions

Why is my Discord stream screen not loading?

Your Discord stream screen may not be loading due to faulty or outdated graphics and network drivers. Try updating or downloading the latest drivers from the manufacturer’s site or on your PC to resolve the issue.

Why is streaming not working for me in Discord?

Streaming may not be working in Discord due to issues with your internet connection or Discord settings. Make sure your internet connection is stable and fast enough to support streaming, and check that your Discord settings are configured correctly.

Why am i unable to watch streams on Discord?

You are unable to watch streams on Discord because of potential bandwidth or CPU usage issues. To address this, consider closing unnecessary programs, lowering stream quality, or using a wired connection for better stability.

Why isn t my stream picking up Discord?

My stream isn’t picking up Discord because the audio sharing setting may not be enabled, or the incorrect audio device is selected in the output settings. Make sure to adjust these settings accordingly.

Peter McCarthy

Having out-of-date account settings on Windows Mail can be frustrating. Let’s explore how to fix this issue quickly and easily.

Before You Begin

First, ensure that your Windows Mail app is up to date by checking for any available updates in the Microsoft Store.

Next, verify that your Microsoft account settings are correct by logging into your account on the Microsoft website.

If you are using a third-party email provider, such as Outlook.com or Apple Mail, make sure your account settings are configured properly.

Check your security and maintenance settings, including Microsoft Defender Antivirus and Windows Firewall, to ensure they are not blocking your email access.

If you are still experiencing issues, consider troubleshooting your Windows 10 operating system or seeking assistance from a professional.

Remember to always keep your computer security up to date with antivirus software and regularly change your password for added protection.

Check Connectivity and Security Settings

• Ensure your device is connected to the internet
• Check your network connection
  • Make sure your Wi-Fi is turned on
  • Restart your router
  • Check for any network outages in your area
• Verify your security settings
  • Ensure your firewall is not blocking Windows Mail
  • Check your antivirus software to see if it is interfering with the mail account

Adjust Privacy and Firewall Settings

Next, navigate to the Privacy section in your computer’s Settings. Here, you can adjust the privacy settings for your Windows Mail account to ensure that your personal information is secure. Make sure that only authorized users have access to your account.

Additionally, consider updating your security and maintenance settings on your computer. Check that your Microsoft Defender Antivirus is up to date and running properly. This will help protect your computer from malware and other security threats.

By adjusting your privacy and firewall settings, you can help keep your Windows Mail account secure and up to date. Be proactive in maintaining your computer’s security to prevent any potential issues in the future.

Update or Re-add Your Account

If your Windows Mail account settings are out of date, the solution may be as simple as updating or re-adding your account. Here’s how to do it:

1. Update your account: Go to your Windows Mail app and navigate to the account settings. Look for an option to update your account, which should refresh the settings and resolve any issues with outdated information.

2. Re-add your account: If updating doesn’t work, try removing your account from the app and then re-adding it. This will give you a fresh start with the correct settings.

3. Check your login credentials: Make sure you are using the correct username and password for your account. Incorrect login information can cause your account settings to be out of date.

Review Advanced Mailbox Settings

Navigate to the “Settings” menu in Windows Mail.
Click on “Manage Accounts” and select the account that is showing as out of date.
Check the incoming and outgoing server settings to ensure they match the settings provided by your email provider.
If the settings are incorrect, update them accordingly and save the changes.
You may also need to adjust the synchronization intervals for your email account to ensure it stays up to date.
Make sure your security certificate is up to date and valid to prevent any issues with sending or receiving emails.
If you continue to experience problems with your account settings being out of date, consider removing and re-adding the account to see if that resolves the issue.
By reviewing and adjusting these advanced mailbox settings, you can ensure that your Windows Mail account stays up to date and functions properly.

Ensure Two-Factor Authentication Compatibility

Step 1: Go to your Microsoft account settings on the web.

Step 2: Navigate to the Security section and find the Two-Factor Authentication option.

Step 3: Enable Two-Factor Authentication and follow the on-screen instructions to set it up.

Step 4: Once Two-Factor Authentication is set up, go back to your Windows Mail account settings.

Step 5: Update your account settings by entering the newly generated verification code when prompted.

Step 6: Save your changes and exit the settings to ensure that Two-Factor Authentication is now compatible with your Windows Mail account.

Address Error Messages and Sync Issues

If you are experiencing error messages and sync issues with your Windows Mail account settings being out of date, there are a few steps you can take to resolve the issue.

First, check your internet connection to ensure that you are connected to the internet and have a stable connection. Sometimes, sync issues can occur due to a poor or unstable internet connection.

Next, update your Windows Mail app to the latest version. Outdated versions of the app can sometimes cause error messages and sync issues. Check for updates in the Microsoft Store and install any available updates.

If you are using an Outlook.com account with Windows Mail, make sure that your account settings are configured correctly. Verify your account settings and update them if necessary to ensure that your account is syncing properly.

You may also want to check your security settings and firewall to ensure that they are not blocking the Windows Mail app from syncing with your email account. Adjust the settings if needed to allow the app to communicate with the necessary servers.

If the issue persists, you can try removing and re-adding your email account in the Windows Mail app. This can sometimes resolve sync issues and error messages related to outdated account settings.

Delete or Modify Outlook Profile Folder

To delete or modify your Outlook profile folder, follow these steps:

1. Close Outlook and go to the Control Panel.

2. In the Control Panel, click on “Mail” or “Mail (32-bit)”.

3. Click on “Show Profiles” and select the profile you want to delete or modify.

4. To delete the profile, click on “Remove” and confirm the action.

5. To modify the profile, click on “Properties” and make the necessary changes.

6. Once you have deleted or modified the profile, open Outlook again to see if the issue is resolved.

Frequently Asked Questions

How do I fix my email settings?

To fix your email settings, make sure your device has a stable internet connection, update your email app, review email sync settings, check Android sync settings, ensure there is enough device storage, and consider resetting your email account if needed.

How do I update Windows Mail?

To update Windows Mail, you can do so by launching the Microsoft Store app, searching for “Mail and Calendar,” and selecting the Update option.

Why is Windows Mail not updating?

Windows Mail is not updating because the advanced mailbox settings may need to be checked. To do this, go to Start, open Mail, select Manage Accounts, choose your email account, then go to Change mailbox sync settings > Advanced mailbox settings to confirm the server addresses and ports are correct.

Peter McCarthy