In this guide, we will discuss how to troubleshoot and reset the red light issue on the Samsung ML-2240 printer.

December 2024: Enhance your computer’s performance and eliminate errors with this cutting-edge optimization software. Download it at this link

  1. Click here to download and install the optimization software.
  2. Initiate a comprehensive system scan.
  3. Allow the software to automatically fix and repair your system.

Identifying the Cause of the Red Light

To identify the cause of the red light on your Samsung ML-2240 printer, first check if there are any paper jams. Open the printer cover and carefully remove any stuck paper. Make sure there are no torn pieces left behind.

If there are no paper jams, the red light could indicate a low toner level. Check the toner cartridge and replace it if necessary. Make sure to use a genuine Samsung toner cartridge to avoid any compatibility issues.

Another possible cause of the red light could be a printer error. Power off the printer, unplug it from the power source, and wait for a few minutes before plugging it back in. This can sometimes reset the printer and resolve any error issues.

If the red light persists after checking for paper jams, replacing the toner cartridge, and resetting the printer, it may indicate a more serious hardware issue. In this case, it is recommended to contact Samsung customer support or a professional technician for further assistance.

Checking for Paper Jams

  • Step 1: Turn off the printer and unplug it from the power source.
  • Step 2: Open the printer cover and remove the toner cartridge.
  • Step 3: Gently pull out any jammed paper from the printer, being careful not to tear it.
  • Step 4: Check for any remaining bits of paper or debris inside the printer.
  • Step 5: Reinstall the toner cartridge and close the printer cover.
  • Step 6: Plug the printer back in and turn it on to see if the red light issue is resolved.

Replacing the Toner Cartridge

To replace the toner cartridge in your Samsung ML-2240 printer, first ensure that the printer is turned off and unplugged. Open the front cover of the printer to access the toner cartridge.

1. Remove the old toner cartridge by pulling it out of the printer carefully.

2. Take the new toner cartridge out of its packaging and gently shake it from side to side to distribute the toner evenly.

3. Insert the new toner cartridge into the printer, making sure it is securely in place.

4. Close the front cover of the printer and plug it back in. Turn the printer on and allow it to go through its initialization process.

5. Your printer should now be ready to use with the new toner cartridge installed.

Resetting the Printer

To reset the Samsung ML-2240 printer, first, ensure that the printer is turned on. Next, press and hold the ‘Cancel’ button for about 10 seconds until the red light stops flashing. This will reset the printer and clear any error messages.

If the red light persists after resetting the printer, try turning off the printer and unplugging it from the power source for a few minutes. Then, plug the printer back in and turn it on to see if the issue is resolved.

If the red light continues to flash, it may indicate a more serious issue with the printer that requires professional assistance. In such cases, it is recommended to contact Samsung customer support for further troubleshooting and repair options.

FAQs

Why is my Samsung printer showing red light?

Your Samsung printer is showing a red light because there may be a paper jam around the toner cartridge or fuser. Try resolving the issue by following the steps to clear any paper jams inside the printer. Open and close the printer cover to see if that resolves the problem.

Why is my printer showing a red light?

Your printer is showing a red light because it is likely running low on paper or the paper roll is not pushed all the way to the back of the printer.

Why is the red light blinking on my Samsung ML-1665?

The red light on your Samsung ML-1665 is blinking to indicate that it is time to replace the cartridge soon.

Was this article helpful?
YesNo