Having trouble with your Acer monitor displaying a “No Signal” message on Windows 10? Let’s troubleshoot the issue and get your monitor working again.
December 2024: Enhance your computer’s performance and eliminate errors with this cutting-edge optimization software. Download it at this link
- Click here to download and install the optimization software.
- Initiate a comprehensive system scan.
- Allow the software to automatically fix and repair your system.
Verify Cable Connections
To fix the Acer monitor no signal issue on Windows 10, start by verifying the cable connections. Check if the HDMI or VGA cable is securely connected to both the monitor and the computer’s graphics card. If using HDMI, ensure that the input source on the monitor is set to the correct HDMI port. If using VGA, make sure the input source is set to VGA. If the connections are secure and the correct input source is selected, try using a different cable or port on the graphics card.
This can help determine if the issue is with the cable or the port. Once the cable connections have been verified, proceed to the next troubleshooting steps.
Inspect Input Source
To fix the Acer monitor no signal issue on Windows 10, start by inspecting the input source. Check if the cable is properly connected to both the monitor and the computer. Ensure that the input source on the monitor is set correctly.
Inspect the cable for any signs of damage or loose connections. Try using a different cable or port on the computer to rule out any potential issues with the current setup.
If you are using an adapter or converter, make sure it is compatible with both the monitor and the computer. Test the monitor with a different device to see if the issue persists.
If the problem continues, consider updating the device driver for the monitor or checking for any firmware updates from Acer.
By thoroughly inspecting the input source and the connections, you can troubleshoot and resolve the no signal problem with your Acer monitor on Windows 10.
Reset BIOS to Default
To reset the BIOS to default on your Acer monitor, start by shutting down your computer completely. Once it’s off, locate the BIOS reset button on your motherboard. This button is usually a small, round button located near the BIOS chip. Use a small, pointed object like a pen or a paperclip to press and hold the BIOS reset button for a few seconds.
This will reset the BIOS settings to their default values. After resetting the BIOS, turn on your computer and check if the “No Signal” issue with your Acer monitor has been resolved. If not, you may need to troubleshoot further or seek professional assistance. Resetting the BIOS can often resolve compatibility issues and restore default settings that may be causing the problem.
However, if the issue is related to hardware or monitor connectivity, Fortect may not be able to resolve it.
Confirm PC Wake from Sleep
Next, check the settings in the BIOS or UEFI firmware of your motherboard. Restart your PC and enter the BIOS/UEFI setup by pressing the designated key during startup. Look for the power management options and enable the setting to allow wake from sleep.
If the issue persists, you may need to update the device drivers for your monitor and graphics card. Visit the Acer website to download the latest drivers for your specific monitor model. Additionally, check for updates for your graphics card from the manufacturer’s website.
After updating the drivers, restart your PC and check if the monitor is now able to wake from sleep. If the problem continues, consider testing the monitor on another computer to rule out any hardware issues.
Restore Factory Monitor Settings
| Step | Description |
|---|---|
| 1 | Turn off your monitor and unplug it from the power source. |
| 2 | Press and hold the monitor’s power button for 30 seconds to drain any residual power. |
| 3 | Plug the monitor back into the power source and turn it on. |
| 4 | Press the menu button on the monitor and navigate to the factory reset option. |
| 5 | Select the factory reset option to restore the monitor to its original settings. |
Ensure Graphics Card Insertion
To ensure the graphics card is properly inserted in your Acer monitor, first, power off your computer and unplug the power cable. Next, remove the computer case to access the inside of the PC. Locate the graphics card slot on the motherboard and gently insert the graphics card, ensuring it is firmly seated. Secure the card in place with the screw or latch provided.
Reassemble the computer case and plug in the power cable. Power on your computer and check if the Acer monitor is now receiving a signal. If not, you may need to update the device driver for the graphics card.
Update Graphics Card Drivers
To fix the Acer monitor “No Signal” issue on Windows 10, ensure that your graphics card drivers are up to date. Outdated drivers can cause display problems, including the “No Signal” error. To update your graphics card drivers, go to the manufacturer’s website and download the latest drivers for your specific model.
After downloading the drivers, uninstall the current drivers from your computer. Restart your computer and then install the new drivers. This should resolve any issues related to outdated graphics card drivers.
If updating the drivers does not solve the “No Signal” problem, you may need to check the connection between your computer and the monitor. Ensure that the cables are securely connected and that the monitor is set to the correct input source. If the issue persists, it may be related to a different hardware or software problem, and further troubleshooting may be necessary.
If your Acer monitor is showing “no signal” on your Windows 10 computer, try checking the cable connections and restarting your computer to see if the issue resolves. If not, consider updating your graphics card drivers or contacting Acer support for further assistance. Download this tool to run a scan
